Flush Mounting for 50A Plug with Dust Cover
This is a flush mounting for 50A connectors with an included dust cap.
Our flush mount has the following features:
The dust cap is flush with the mounting surface when installed.
Front of cover is domed & radiused on corners to improve appearance.
The backing plate sandwiches the dust cover retaining loop, keeping the wire away from the panel it's mounted to.
The backing plate can also be used as a handy drilling template
The dust cap retaining wire can be mounted on top or bottom side of mount.
Supplied with stainless steel hardware for plug retention & mounting.
50 Amp plug isn't included, but can be ordered here.
Red T-handle isn't included, but can be ordered here.
78mm wide x 41mm high x 53mm deep.
Made from High impact ABS plastic.
Supplied screws protrude 8mm from the bottom of the mounting.
You will receive:
- 2 x 8G x 19mm stainless self tapping screws & washers.
- 2 x Stainless plug retaining bolts & nuts.
- 1 x 50A flush mount as in pictures.
- 1 x backing plate for mount.
- 1 x Dust cover as in pictures.
Plug & T-handle are not included.