Panel Mounting for 50A Plug with Dust Cover
This is a fully enclosed panel mount cover for 50A connectors with an included dust cap.
Mounting covers the wires & connector.
This version includes a dust cap.
My van came with a cigarette lighter socket for the solar connection.
This wasn't adequate for my purpose & I couldn't find a neat mounting for a 50A connector.
This cover will replace the panel mount cigarette lighter used on some vans.
Also great for mounting a 50A connector to a flat surface without the wires showing.
Our mount has the following features:
The lower plate keeps the plug away from the surface it's mounted to & reduces the chances of scratching when the plug is removed.
The mount covers the wires & their exit hole from the panel.
The lower plate can also be used as a drilling template
The dust cap is retained using a wire loop that is held between the lower plate & the top of the cover.
Dust cap retaining wire can be mounted on left or right side of cover.
Supplied with stainless steel hardware for plug retention & mounting.
50 Amp plug isn't included, but can be ordered here.
Red T-handle isn't included, but can be ordered here.
98mm long x 71mm wide x 28mm high
Made from High impact ABS plastic.
Supplied screws protrude 8mm from the bottom of the mounting.
You will receive:
- 5 x 8G x 19mm stainless self tapping screws & washers
- 1 x Stainless plug retaining bolt & nut
- 1 x 50A flush mount as in pictures.
- 1 x Dust cover as in pictures
Plug & T-handle are not included.